Differences

This shows you the differences between two versions of the page.

--- opnsenseonvelocloudedge510 [2025/11/29 14:27] – Fabián Rodríguez
+++ opnsenseonvelocloudedge510 [2025/11/30 13:55] (current) – Fabián Rodríguez
@@ Line 39: / Line 39: @@
       - Run the two commands below to change the root password<code>mount_root
 echo -e "youpassword\nyoupassword" | passwd root</code>
-      - Reboot device and login with new password
+  - Let's connect the network before rebooting : connect a network cable from your router or switch to the 4th port (GE4). Connect your computer to port 1 (GE1).
-  - Once logged in,<code>cd /root</code>
+  - Reboot the device, it will take 3-4 minutes before you can connect to it.
-  - From there, let's configure the network. Connect a network cable from your router or switch to the 4th port (GE4) and allow it to establish a link and connect. Connect your computer to port 1 (GE1).
+  - Youmay need to press **Enter** a couple of times to see the **vc-edge login:** prompt. Login with the  password you configured before (user is **root**).
   - Change to the existing ''firmware'' directory: <code>cd /root/firmware</code>
   - Grab a copy of the modified corebooot firmware : \\ ''wget <nowiki>https://raw.githubusercontent.com/PhoenixSheppy/VeloCloud-Edge-510-OPNsense-Conversion-Guide/refs/heads/main/firmware/2017-4-10-coreboot.rom</nowiki>''\\ \\ This output should follow:\\ <code>Connecting to raw.githubusercontent.com (185.199.108.133:443)